PVC SCH 40 Pressure Fittings
Polyvinyl chloride (PVC) Schedule 40 pressure fittings are used for potable water, chilled water, irrigation, golf course construction, and pool & spa applications. PVC is one of the thermoplastic materials most frequently specified for a variety of products used in the pipe and fittings industry. Due to its excellent rigidity, corrosion and chemical resistance properties, it is also used in many chemical related areas. Conforms to ASTM Standards D 2466 catalogue
PVC DWV Fittings
Drain, waste and vent fittings made of polyvinyl chloride (PVC). PVC-DWV fittings are used for residential and commercial sanitary systems. PVC is one of the thermoplastic materials most frequently specified for a variety of products used in the pipe and fittings industry. Due to its excellent rigidity, corrosion and chemical resistance properties, it is also used in many chemical related areas. Meets ASTM D 2665 and D 3311. These standards provide the material and test requirements as well as the fitting geometries for PVC fittings. These fittings are joined by threading or solvent cementing and can easily be connected to steel, copper or cast iron through the use of transition fittings. catalogue
PVC SCH 80 Pressure Fittings
Polyvinyl chloride (PVC) Schedule 80 fittings for use with chemical processing, industrial plating, chilled water distribution, deionized water lines, chemical drainage and waste water treatment systems. Conforms to ASTM D-1784 Class 12454-B, formerly Type 1, Grade 1. Joined by solvent cementing, threading or flanging. Maximum service temperature 140°F. NSF approved. Meets all applicable ASTM standards. catalogue
CPVC SCH 80 Pressure Fittings
(Chlorinated Polyvinyl Chloride) CPVC conforming to ASTM D-1784 Classification 23447-B, formerly designated Type IV, Grade 1, is a resin created by the post- chlorination of a PVC polymer. The material’s resistance to chemical attack is almost identical to that of PVC. And the physical properties of CPVC are very similar to those of PVC at 73° F, but the additional chlorine in the CPVC polymer extends its maximum service temperature from 140° F to 210° F. For example, the design stress for CPVC is 2,000 psi at 73° F, identical to that of PVC. But its strength is only reduced to 500 psi at 180° F, as compared to 440 psi for PVC at 140° F. For more than 35 years, CPVC has proven to be an excellent material for hot corrosive liquids, hot and cold water distribution, and similar applications above the useful temperature range for PVC. CPVC may even be chosen over PVC in the 110° F to 140° F temperature range because its higher strength-at-temperature, requiring less frequent piping supports, can translate to a more favorable overall installed cost than PVC. CPVC is joined by solvent cementing, threading, or flanging.
Actuation Valves
Rely on Precise Actuator Control
Choose NIBCO® electric or pneumatic actuation systems for new or retrofit ball, butterfly, plug valve or damper applications. The modular actuators are engineered for flexibility. You can choose from a range of output torques in on-off, modulation or proportional control. You also get the assurance of the NIBCO warranty, customer service expertise, specification and selection assistance.
- CSA certified to NEMA enclosures
- Electric or pneumatic, or pre-assembled with valve
- Compact, rugged design
- Switch boxes and accessories available
- Maximum torque & Overload protection
Ball Valves
The Right Ball Valve for the Job
A wide selection of NIBCO® ball valves are available in bronze, brass, lead-free*, carbon steel or stainless steel materials. Select the right ball valve in one-piece, two-piece, three-piece, full port, or conventional port. A range of trim material is available. The right end connections to choose from include press-to-connect, threaded, solder or flanged.
To make your selection easier, NIBCO offers specification and submittal assistance. You also get the assurance of the NIBCO warranty, along with superior customer service expertise. Spec a job, find your distributor, get catalogs and submittals, place and track your order.
- Commercial, industrial and residential applications
- Range of handles, including NIB-SEAL®
- Wide range of sizes
Butterfly Valves
Versatility, Economy, Selection
Butterfly valves provide bi-directional dead-end service in commercial and industrial service. To make your selection easier, NIBCO offers specification and submittal assistance. You also get the assurance of the NIBCO warranty, along with superior customer service expertise.
- Wafer lug or grooved end connections
- Press-to-connect ends selection
- Broad range of sizes
- Lug or wafer types
- Ductile iron, cast iron, CPVC materials
- Lead-free* selection
- Fire protection selection
- High performance selection
BlazeMaster® Fittings
Injection molded BlazeMaster® CPVC thermoplastic fittings are designed for use in residential and commercial fire protection and fire sprinkler systems. Fittings include adapters, bushings, caps, couplings, crosses, elbows, flanges, tees and unions. BlazeMaster® CPVC compounds are specially formulated for durability, corrosion resistance, excellent hydraulics, high heat tolerances and superior flame and smoke characteristics. Backed by the NIBCO warranty, service expertise, and selection assistance. Spec a job, find your distributor, get catalogs and submittals, place and track your order.
- Factory Mutual (FM) approved selection
- UL and ULC Listed selection
- Certified by NSF
- NFPA approved selection
- Lead-free* selection
Plain End Pipe - Kynar® Natural PVDF, 6600
The Chemtrol® plain end pipe is Kynar® Natural PVDF (PVDF) thermoplastic in 20-ft. lengths. The PPVDF piping is ideal for use with hot corrosive liquids, chemical processing, industrial plating, and waste treatment systems.
- Design stress of 1,360 psi at 73°F
- Maximum service temperature 280°F
- 20-ft lengths
- Schedule 40 and Schedule 80 wall thicknesses
- Do not use or test with compressed air or other gases
- ASTM D3222 Type I material
- Size range 1/2" to 6"
